axial rotation

英 [ˈæksiəl rəʊˈteɪʃn]

美 [ˈæksiəl roʊˈteɪʃn]

网络  绕轴自转; 自转; 轴向转动; 轴向旋转; 绕轴旋转

英英释义

noun

• rotary motion of an object around its own axis
  1. wheels in axial rotation
  Synonym:axial motionroll

双语例句

• Motions of flexion/ extension, lateral bending and axial rotation were produced by six pure moments with maximum of 10.0N · m and measured with stereophotogrammetry.
  对标本施加最大为10.0N.m的力偶矩，使之产生前屈、后伸、左右侧屈和左右轴向旋转运动，并由双平面立体测量的计算机图像分析系统得到节段运动范围。
• The stability with wire fixation was greater and equal to in flexion and in extension, lateral bending and axial rotation respectively.
  棘突钢丝固定在前屈运动方向上可加强节段的稳定性，可恢复节段在后伸、侧弯和轴向旋转运动方向上的稳定性；
• Axial Rotation Symmetry of Third-order Nonlinear Elasticity of Quasicrystals
  准晶三阶非线性弹性的轴转动对称性
• This model was validated by comparing the average stiffness tested in flexion and extension, left lateral bending, and left axial rotation under physiological loading with the corresponding in vitro experimental data and finite element analysis data published by other scholars.
  模型的验证是通过计算在屈伸、侧弯、轴向旋转加载条件下的平均刚度值，并与以往学者实验模型及有限元模型的分析结果相比较，分析其符合程度。
• Under the precondition of incompressible flow, fluid spiral motion in SK static mixer tube was resolved into axial beeline motion and circumferential rotation motion.
  在流体不可压缩的假设前提下，将流体在SK型静态混合器中的螺旋形运动分解成轴向直线运动和环向旋转运动。
• When swinging drive mechanical operation, such as the rotation speed of the force to make efforts axial shaft before and backward rotation and enable higher plane.
  当摇摆传动机械运作时，等速度的旋转入力轴使出力轴向前和向后旋转，并使平面升高。
• Roundness error is the variation between the ideal circle and the profile of the cross section, which is perpendicular to the axial line of solid rotation, the value of roundness error affect the rotary precision, the centring precision and the reliability of fastened conjunction directly.
  圆度误差是指在垂直于回转体轴线截面上的轮廓对其理想圆的变动量，误差值的大小直接关系到孔轴配合的回转精度、定心精度以及紧固连接的可靠性。
• In the role of air power, the turbine rotation, through the screw into the axial rotation movement, lift the fuse of insurance.
  在空气动力作用下，涡轮旋转，通过螺纹将转动转化成轴向运动，解除引信的保险。
• Conclusion: Unilateral pedicle screws fixation cannot provide sufficient stability in lateral bending and axial rotation, pedicle screws endure more stress.
  结论：单侧椎弓根螺钉固定不能很好地控制侧屈和旋转载荷，椎弓根螺钉承受较大的应力；
• There was slight axial rotation of the tibia relative to the femur.
  相对于股骨，胫骨出现轻微轴向转动。